Installing a WPC fence yourself.
The Nordvesta system is modular. Good preparation, the right ground and correct installation determine the end result.
Installation guide for the WPC fence system
All components, the tools you need and the steps for installation on hard or soft ground, plus maintenance advice. The guide is in Dutch.
Coming soonQuestions about installation? Get in touch, we are happy to help.
How to build a panel.
Set the posts
Set the aluminium posts plumb and at equal centre-to-centre distances. On soft ground with a foundation in the soil, on hard ground anchored to the paving or concrete.
Fit the bottom rail
Fix the bottom rail between the posts with the L-brackets and the self-tapping screws.
Stack the boards
Slide the WPC boards with tongue and groove into the slots of the posts, together with the cover profiles.
Top rail and post cap
Finish the panel with the top rail and place the post cap on the post.
Next panel
Each next panel shares a post with the previous one. That is how you complete the whole line, with a gate if you like.
Common mistakes.
- Insufficient foundation under the posts
- Posts not plumb or not set to size
- Measurements not checked beforehand
- Boards not stored flat and dry before installation
- Too little space for material movement
Unsure about your situation? Ask for technical advice.
Measure your garden, we calculate the rest.
Measure your garden
Measure the total length of each straight side and count the corners.
Choose design and colour
Classic or Linear, Charcoal or Golden Teak, and 11, 12 or 13 boards high.
Receive your proposal
A complete proposal with parts list: boards, posts, rails, brackets and self-tapping screws.
Install it yourself or ask for advice.
The system is modular. Check in advance which components and tools you need and how installation differs between hard and soft ground. Good ground, a proper foundation and correct installation determine the end result.
Installation guide
Step-by-step installation on hard or soft ground.
Download coming soon